Electric Energy Saver
The Electric Energy Saver is designed to make the motors in your home more energy efficient like your Central Air Conditioner which accounts for 40-60% of your power bill. The Electric Energy Saver was created to save on your Power Bill. It is installed either to an Electric Panel or directly to a motor in your home (like your Central A/C or pool pump).
The Electric Energy Saver is designed to lower your Electric Bill, increase the life of your appliances and motors, and safeguard your home against power surges (up to 2000 joules of heat) by making the motors in your home more efficient.
When motors in your home turn on, they demand from the power company's transformer power. This demand of power from your motor goes through the wires on your property, through the electric panel, through your power meter gauge, up to the transformer and back down through the wiring in your home again to your motor. Throughout this process, the electrical wiring in your home heats up and strains the motor and wiring. This heat generated from this process is called watts.
Motors in your home (such as your Central Air Conditioner, Heat Pump or Pool Pump) are inefficient. When they run, there is lost energy that you are billed for by your energy company but that energy is completely wasted. The Electric Energy Saver recycles (otherwise lost energy/watts) and releases it back to your motor when needed. By doing so, this recycling process reduces the amount of heat on the wires and the motors in your home. Reducing this heat (kilowatts) will lower your electricity bill and lengthen the life of the motors in your home. Inductive Motors are in your Central Air Conditioner, Pool Pumps, Heat Pumps, Refrigerator, Freezer, Washer, Dryer, Ceiling Fans ,T-12 Fluorescent Lighting Ballast, etc. Things with copper windings that create electromagnetic fields are inductive loads, like an inverter that turns DC current into AC current.
The Electric Energy Saver also shields your home against power surges/spikes. By reducing your demand from the power company, this saves you money $$$$$!
Your Power Company & Large industrial complexes have been using this same technology to save on their energy costs. The Electric Energy Saver operates of the same technology. It reuses the otherwise wasted energy and recycles it back to your motors so you have less demand/usage from your power company.
The Electric Energy Saver is designed to lower your Electric Bill, increase the life of your appliances and motors, and safeguard your home against power surges (up to 2000 joules of heat) by making the motors in your home more efficient.
- BRAND NEW!
- SAVE on your Electric Bill up to 25%!
- 20 Year Warranty on Workmanship & Product Defects
- All our models are UL & CuL listed.
- MAINTENANCE FREE! You install the device & it works for 25 Years. FIT & FORGET TECHNOLOGY!
When motors in your home turn on, they demand from the power company's transformer power. This demand of power from your motor goes through the wires on your property, through the electric panel, through your power meter gauge, up to the transformer and back down through the wiring in your home again to your motor. Throughout this process, the electrical wiring in your home heats up and strains the motor and wiring. This heat generated from this process is called watts.
Motors in your home (such as your Central Air Conditioner, Heat Pump or Pool Pump) are inefficient. When they run, there is lost energy that you are billed for by your energy company but that energy is completely wasted. The Electric Energy Saver recycles (otherwise lost energy/watts) and releases it back to your motor when needed. By doing so, this recycling process reduces the amount of heat on the wires and the motors in your home. Reducing this heat (kilowatts) will lower your electricity bill and lengthen the life of the motors in your home. Inductive Motors are in your Central Air Conditioner, Pool Pumps, Heat Pumps, Refrigerator, Freezer, Washer, Dryer, Ceiling Fans ,T-12 Fluorescent Lighting Ballast, etc. Things with copper windings that create electromagnetic fields are inductive loads, like an inverter that turns DC current into AC current.
The Electric Energy Saver also shields your home against power surges/spikes. By reducing your demand from the power company, this saves you money $$$$$!
Your Power Company & Large industrial complexes have been using this same technology to save on their energy costs. The Electric Energy Saver operates of the same technology. It reuses the otherwise wasted energy and recycles it back to your motors so you have less demand/usage from your power company.
Transformer
The Transformer (pictured above) is an inductive load of your power company's just like the motors in your home (A/C, Refrigerators, etc.) are your inductive loads.
The Transformer (pictured above) is an inductive load of your power company's just like the motors in your home (A/C, Refrigerators, etc.) are your inductive loads.
High Voltage Pole Mount Capacitor
The capacitors your power company uses (pictured above) to correct their power factors. When the power factor is corrected, the demand is reduced. The electric meter on your home that your power company reads is a demand meter. With the Electric Energy Saver, you can reduce demand and legally slow down your meter simply by making the motors in your home more efficient.
Your electric company has used this technology for 70+ years to correct their power factors. Why would your power company spend tens of thousands of dollars adding capacitor banks to their grids if this technology doesn't work?
BECAUSE THIS TECHNOLOGY DOES WORK!
If you look in your neighborhood at the power poles, for approximate every 50 transformers, you will notice a capacitor banks like the one pictured above correcting the power factor of the transformers in your neighborhood.
The capacitors your power company uses (pictured above) to correct their power factors. When the power factor is corrected, the demand is reduced. The electric meter on your home that your power company reads is a demand meter. With the Electric Energy Saver, you can reduce demand and legally slow down your meter simply by making the motors in your home more efficient.
Your electric company has used this technology for 70+ years to correct their power factors. Why would your power company spend tens of thousands of dollars adding capacitor banks to their grids if this technology doesn't work?
BECAUSE THIS TECHNOLOGY DOES WORK!
If you look in your neighborhood at the power poles, for approximate every 50 transformers, you will notice a capacitor banks like the one pictured above correcting the power factor of the transformers in your neighborhood.
Does the Electric Energy Saver Operate Properly if I have a Solar System?
Yes, the Electric Energy Saver helps the motors in your home or business run more efficiently. When the motors on your property (A/C, Heat Pump, Washer/Dryer, Refrigerator, Freezers) are more efficient, they will require less energy from your solar system. If you are selling electricity back to the power company, that means more dollars in your pocket.
How Many Electric Energy Savers do I Need?
Usually a home needs 1 unit. We have found that the best way to lower your power bill is by directly installing the unit at your largest motor in your home. (Usually your Central Air Conditioner)
The Electric Energy Saver works for a 200 amp service panel or a motor that is pulling 15-35 amps. If you are unsure, check your panel box or your motor to determine how many amps it is drawing. If your main breaker is 200 amps or your motor is pulling 15-35 amps , you will need only 1 unit.
Yes, the Electric Energy Saver helps the motors in your home or business run more efficiently. When the motors on your property (A/C, Heat Pump, Washer/Dryer, Refrigerator, Freezers) are more efficient, they will require less energy from your solar system. If you are selling electricity back to the power company, that means more dollars in your pocket.
How Many Electric Energy Savers do I Need?
Usually a home needs 1 unit. We have found that the best way to lower your power bill is by directly installing the unit at your largest motor in your home. (Usually your Central Air Conditioner)
The Electric Energy Saver works for a 200 amp service panel or a motor that is pulling 15-35 amps. If you are unsure, check your panel box or your motor to determine how many amps it is drawing. If your main breaker is 200 amps or your motor is pulling 15-35 amps , you will need only 1 unit.
- SAVE on your Electric Bill up to 25%!
- The Electric Energy Saver can be installed to an electric panel or directly to a motor
- 20 Year Warranty on Workmanship & Product Defects
- Includes Installation Instructions & Wiring Diagram.
- Made in USA
- 100% Satisfaction Guaranteed or your money back so you have NOTHING to lose!
How long does the Electric Energy Saver take to install?
It takes 20-30 minutes to install depending on if you install to an electric panel or directly to a motor such as a Central A/C Motor, Heat Pump Motor or Pool Pump Motor.
It takes 20-30 minutes to install depending on if you install to an electric panel or directly to a motor such as a Central A/C Motor, Heat Pump Motor or Pool Pump Motor.
Electric Energy Saver- Specifications
25 year Life-Expectancy
Will Handle Power Surges and help with Brownouts! (Surge Suppression up to 2000 Joules)
Will work on 220 & 240 Volt AC Applications as well as 110 Volts internationally.
Model ES1200 is for single phase 200 amp service 50/60 Hertz
Unit Size Residential (Single Phase)- is 6" x 6" x 4"- We have models ES1050, ES1100, ES1200 for single phase.
Unit Size Commercial (Three Phase)- is 10" x 10" x 6"-We have models ES3050, ES3100, ES3200 and ES3400 for Three phase.
Box Rated for Indoor or Outdoor Installation. Nema 3R Rated (Metal) Rainproof